Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Thermoplastic enclosure
• Double-insulated
• Good resistance to oil and petroleum spirit
• 111,5 mm x 92 mm x 36 mm
• 2 cable entries M 20 x 1.5
• Simple fitting, especially on 35 mm profiles

 
 
Ordering details
 
Product type descriptionTESZ1102/S/35
Article number101030520
EAN Code
eCl@ss27-27-26-01
 
Approval
 
Approval

 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
B10d Normally open contact (NO)1.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightTESZ
StandardsIEC/EN 60947-5-1, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the contactsSilver
- Material of the hingeAluminium
Housing coatingNone
Weight316
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable entry M 20 x 1.52
Cable section
- Min. Cable section0,5
- Max. Cable section1
Mechanical life> 1.000.000 operations
Switching frequency120
noticeAll indications about the cable section are including the conductor ferrules.
Positive break angle10
Positive break force1
additional hinge (Y/N)No
mounting hinge (Y/N)Yes
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+65
Protection classIP65
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts1
Number of safety contacts2
Rated impulse withstand voltage2.5
Rated insulation voltage250
Thermal test current2.5 A
Utilisation categoryAC-15: 230 V / 2 A,
DC-13: 24 V / 1 A
Max. fuse rating2 A gG D-fuse
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor111.5
- Height of sensor92
- Length of sensor36
Suitable for mounting to profile systems35
 
notice
 
The additional hinge including mounting accessories is also available separately, part number Z 400
The opening angle has been set to 4° in factory.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.04.2019 - 20:19:27h Kasbase 3.3.0.F.64I