Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Metal enclosure
• 118 mm x 155 mm x 64 mm ( basic component)
• Actuator head can be repositioned in steps 4 x 90°
• Continuous adjustment of lever position 360°
• Lever can be transposed by 180°
• In temperature-resistant version, the roller can be mounted in two different positions on the shaft
• 2 cable entries M 20 x 1.5

 
 
Ordering details
 
Product type descriptionTL 461-22Y - Ordering suffix
Article number101059433
EAN Code4030661254326
eCl@ss27-27-06-01
 
Approval
 
Approval
 
Global Properties
 
Permanent light461 Rollenschwenkhebel L
StandardsEN 60947-5-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)No
Standard housing (Y/N)No
Materials
- Material of the housingscast iron, galvanized
- Roller materialPlastic
- Material of the contactsSilver
Housing coatingpainted
Weight2405
Slide formCastor
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable section
- Min. Cable section1.5
- Max. Cable section2.5
AWG-Number13
Active principlemechanical
Mechanical life10.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
Design of actuating elementRoller lever
Bounce duration
Switchover time
Contact opening2 x 6
Actuating speed with vertical actuating angle to switch axis
- Min. Actuating speed1
- Max. Actuating speed3
- Actuating angle from left of switch axis30
- Actuating angle from right of switch axis30
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−30
- Max. environmental temperature+90
Protection classIP65 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO) Opener (NC)
- with double break
Switching principleCreep circuit element
- positive break NC contact
Number of shutters2
Number of openers2
Rated impulse withstand voltage6
Rated insulation voltage400
Thermal test current16 A
Utilisation categoryAC-15: 400 V / 4 A
Max. fuse rating16 A gG D-fuse
 
Dimensions
 
Dimensions of the sensor
- Width of sensor118
- Height of sensor248
- Length of sensor64
Roller wide9
Roller diameter36
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: TL 461-22Y- 1276-2
...- 1276-2 gold-plated contacts

...-1801 Splined shaft and lever available with 10° toothing

...- UE Slow action with overlapping contacts

...- H Slow action with staggered contacts

...-RMS Available with metal roller


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 07.12.2019 - 00:58:33h Kasbase 3.3.0.F.64I