Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Metal enclosure
• 1 Contact
• 62 mm x 58 mm x 50 mm ( basic component)
• Switching points and contact function adjustable
• 1 Cable entry M 20 x 1.5
• Actuator head can be repositioned in steps 4 x 90°
• Continuous adjustment of lever position 360°
• Lever can be transposed by 180°
• Epoxy resin rod

 
 
Ordering details
 
Product type descriptionUV10H 431Y - Ordering suffix
Article number101060488
EAN Code
eCl@ss27-27-06-01
 
Approval
 
Approval EAC
 
Global Properties
 
Permanent lightU 431 Stabschwenkhebel 10H
StandardsEN 60947-5-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)No
Standard housing (Y/N)No
Materials
- Material of the housingslight alloy die-casting
- Material of the rodEpoxy resin
- Material of the contactsSilver
Housing coatingpainted
Weight465
Slide form
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable section
- Min. Cable section1.5
- Max. Cable section2.5
AWG-Number13
Active principlemechanical
Mechanical life10.000.000 operations
Contact life2.000.000 operations, at 6 A / 400 V, cos φ = 0,4
noticeAll indications about the cable section are including the conductor ferrules.
Design of actuating elementRod lever
Contact opening2 x 1.5
Actuating speed with vertical actuating angle to switch axis
- Min. Actuating speed1
- Max. Actuating speed3
- Actuating angle from left of switch axis30
- Actuating angle from right of switch axis30
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−20
- Max. environmental temperature+60
Protection classIP65 to IEC/EN 60529
 
Electrical data
 
Design of control elementOpener (NC)
Switching principleCreep circuit element
Number of shutters0
Number of openers1
Rated insulation voltage Ui500 V
Thermal test current Ithe16 A
Max. fuse rating16 A gG D-fuse
 
Dimensions
 
Dimensions of the sensor
- Width of sensor62
- Height of sensor258
- Length of sensor50
Staff diameter6
 
notice
 
Type of contact and switching points can be factory set to order.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: UV10H 431Y- 1272
...- 1272 Version for low temperatures to -30°C


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.07.2019 - 15:17:14h Kasbase 3.3.0.F.64I