Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Metal enclosure
• 3 Contacts
• 62 mm x 105 mm x 50 mm ( basic component)
• Switching points and contact function adjustable
• 3 cable entries M 20 x 1.5
• Actuator head can be repositioned in steps 4 x 90°
• Continuous adjustment of lever position 360°
• Lever can be transposed by 180°

 
 
Ordering details
 
Product type descriptionUVH 433Y-3S - Ordering suffix
Article number101091680
EAN Code
eCl@ss27-27-06-01
 
Approval
 
Approval EAC
 
Global Properties
 
Permanent lightU 433 Rollenschwenkhebel H
StandardsEN 60947-5-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)No
Standard housing (Y/N)No
Materials
- Material of the housingslight alloy die-casting
- Roller materialPlastic
- Material of the contactsSilver
Housing coatingpainted
Weight500
Slide formCastor
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable section
- Min. Cable section1.5
- Max. Cable section2.5
AWG-Number13
Active principlemechanical
Mechanical life10.000.000 operations
Contact life2.000.000 operations, at 6 A / 400 V, cos φ = 0,4
noticeAll indications about the cable section are including the conductor ferrules.
Design of actuating elementRoller lever
Contact opening2 x 1.5
Actuating speed with vertical actuating angle to switch axis
- Min. Actuating speed1
- Max. Actuating speed3
- Actuating angle from left of switch axis30
- Actuating angle from right of switch axis30
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−20
- Max. environmental temperature+60
Protection classIP65 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of shutters3
Number of openers0
Rated insulation voltage Ui500 V
Thermal test current Ithe16 A
Max. fuse rating16 A gG D-fuse
 
Dimensions
 
Dimensions of the sensor
- Width of sensor62
- Height of sensor163
- Length of sensor50
Roller wide8.5
Roller diameter20
 
notice
 
Type of contact and switching points can be factory set to order.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: UVH 433Y-3S- 1272
...- 1272 Version for low temperatures to -30°C

...-RMS Available with metal roller

...- 1164 Splined shaft and lever available with 10° toothing


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 25.04.2019 - 09:17:47h Kasbase 3.3.0.F.64I