Datasheet - TV14H 235-02z - 101094053 - eclass 27272601 27-27-26-01

Home

Position switch

235 Metal enclosure - EN 50047 with Actuator

235 Roller lever 14H

TV14H 235-02z

Add Product to the basket.

TV14H 235-02z

Datasheet

• Metal enclosure
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 30 mm x 63,5 mm x 30 mm
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50047
• 1 Cable entry M 20 x 1.5
• Lever angle adjustable in 10° steps

	Preferred typ

Ordering details

Product type description	TV14H 235-02Z - Ordering suffix
Article number	101094053
EAN Code	4030661067407
eCl@ss	27-27-26-01

Approval

Approval	USA/CAN CCC EAC

Classification

Standards	ISO 13849-1
B10d Normally-closed contact (NC)	20.000.000
Mission time	20 Years
notice

Global Properties

Permanent light	T 235 Rollenschwenkhebel 14H
Standards	IEC 60947-5-1, ISO 13849-1, BG-GS-ET-15
Compliance with the Directives (Y/N)	Yes
Suitable for safety functions (Y/N)	Yes
Materials
- Material of the housings	Zink
- Lever material	Metal film
- Roller material	Plastic
- Material of the contacts	Silver
Housing coating	painted
Housing construction form	Norm construction design
Weight	205

Mechanical data

Design of electrical connection	Screw connection
Cable section
- Min. Cable section	0,75
- Max. Cable section	2.5
Mechanical life	20.000.000 operations
Switching frequency	max. 5000 /h
notice	All indications about the cable section are including the conductor ferrules.
Design of actuating element	Roller lever
actuating torque	min. 15 Ncm
Bounce duration	in accordance with actuating speed
Switchover time	in accordance with actuating speed
Positive break torque	18.5 Ncm
Actuating speed with actuating angle 30° to switch axis
- Min. Actuating speed	4122 mm/min
- Max. Actuating speed	1 m/s

Ambient conditions

Ambient temperature
- Min. environmental temperature	−30 °C
- Max. environmental temperature	+80 °C
Protection class	IP67

Electrical data

Design of control element	Opener (NC)
Switching principle	Creep circuit element
- positive break NC contact
Number of auxiliary contacts	0
Number of safety contacts	2
Rated impulse withstand voltage Uimp	6 kV
Rated insulation voltage Ui	500 V
Thermal test current Ithe	10 A
Utilisation category	AC-15: 230 V / 4 A, DC-13: 24 V / 1 A
Required rated short-circuit current	1000 A
Max. fuse rating	6 A gG D-fuse

ATEX

Explosion protection categories for gases	None
Explosion protected category for dusts	None

Dimensions

Dimensions of the sensor
- Width of sensor	30 mm
- Height of sensor	114 mm
- Length of sensor	46 mm

Diagram

Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact

Switch travel diagram

Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel

Ordering suffix

The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: TV14H 235-02z-1637
...-1637	0,3 µm gold-plated contacts

...-NPT	Cable entry NPT 1/2“

...-Z	Actuator head gasket

...-RMS	Available with metal roller

...-ST	M12 connector with A-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Operating current Ie: AC-15: 50 V / 4 A Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.

...-2310	M12 connector with B-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Operating current Ie: AC-15 50 V / 4 A Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.

...-2574	$missingName$


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 13.12.2019 - 18:20:05h Kasbase 3.3.0.F.64I