Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Metal enclosure
• Good resistance to oil and petroleum spirit
• For left or right hinged doors
• 141 mm x 115 mm x 21,5 mm
• Simple mounting, suitable for all conventional profile systems (30 … 60 mm)
• 2 cable entries M 16 x 1.5
• with fixed switching angle

 
 
Ordering details
 
Product type descriptionTESFA/S/0
Article number101182063
EAN Code
eCl@ss27-27-26-01
 
Approval
 
Approval

 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
B10d Normally open contact (NO)1.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightTESF
StandardsEN 60947-5-1 / BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Materials
- Material of the housingszinc die-cast
- Material of the contactsSilver-nickel alloy 10
Enclosure colorBlack
Weight617
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable section
- Min. Cable section0,5
- Max. Cable section1
Mechanical life> 1.000.000 operations
Switching frequency1200/h
noticeAll indications about the cable section are including the conductor ferrules.
Opening angle180°
Positive break angle10°
additional hinge (Y/N)No
Adjustable switching angle (Y/N)No
Alignment aid (Y/N)Yes
Mounting inside (Y/N)
No
Mounting outside (Y/N)Yes
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25 °C
- Max. environmental temperature+65 °C
Protection classIP65
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts2
Number of safety contacts2
Rated impulse withstand voltage Uimp2.5 kV
Rated insulation voltage Ui250 V
Thermal test current Ithe2.5 A
Utilisation categoryAC-15: 230 V / 2 A,
DC-13: 24 V / 1 A
Max. fuse rating2 A gG D-fuse
Switching of low voltages1 / 5
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor141 mm
- Height of sensor115 mm
- Length of sensor21.5 mm
 
notice
 
Closed guard device = 0° in contact switch travel diagrams.
The factory-set switching angle is 3°.
The positive break angle is 5°.
Until the limit of the mechanical life has been reached the angle can increase up to 8° under normal wear-out conditions.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.04.2019 - 20:08:06h Kasbase 3.3.0.F.64I