2 x female connector, 4-pole 1 x male connector, 4-pole
BNS 33, BNS 36, BNS 260
min. 100 operations cycles
- Min. environmental temperature
- Max. environmental temperature
The BNS-Y-11 adapter is suitable for BNS safety sensors with NO and NC contacts. The BNS-Y-11 enables a series-parallel wiring of the safety sensors, in which the NC contacts of the safety sensors are wired in series and the NO contacts are wired in parallel.
Any conventional 4-pole cable with M8 connector can be used as connecting cable.
The sensor chain is extended by clipping-on further Y-adapters in the direction indicated by the arrow. The extension lead must be terminated by a safety sensor.
Only safety sensors with the same contact configuration can be wired in series. The BNS-Y-11 and BNS-Y-02 types must not be mixed.
The maximum length of the series-wired chain is 50 m.
Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
14:08:26h Kasbase 3.3.0.F.64I