Datasheet - EX-BNS 180-12Z-2187-2-3G/D 10,0M - 101208353

Home

Safety sensors

EX-BNS 180

EX-BNS 180-12Z-2187-2-3G/D 10,0M

Add Product to the basket.

EX-BNS 180-12Z-2187-2-3G/D 10,0M

Datasheet

• Ex certified
• Thermoplastic enclosure
• Suitable for food processing industry only in combination with BP 15 SS
• Ø M18
• Particularly large switching distance
• Long life
• no mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling



Ordering details

Product type description	EX-BNS 180-12Z-2187-2-3G/D 10,0M
Article number	101208353
EAN Code	4030661379913
eCl@ss	27-27-24-02

Approval

Approval	ATEX

Classification

Standards	EN ISO 13849-1
B10d Normally-closed contact/Normally open contact (NC/NO)	25.000.000
- notice	at max. 20% contact load
Mission time	20 Years
notice

Global Properties

Permanent light	EX-BNS 180
Standards	IEC 60947-5-3, EN 60079-0, EN 60079-15, EN 60079-31, BG-GS-ET-14
Compliance with the Directives (Y/N)	Yes
Materials
- Material of the housings	Plastic, glass-fibre reinforced thermoplastic
- Material of the cable mantle	PVC
Housing construction form	cylinder, thread
Weight	401
Coding available (Y/N)	No
Monitoring function of downstream devices (Y/N)	No
Prerequisite evaluation unit
Recommended safety-monitoring module
Recommended actuator	BP 6, BP 8, BP 10, BP 15 SS

Mechanical data

Design of electrical connection	Cable
Cable length	10
Conductors	6 x 0,25
AWG-Number	23
mechanical installation conditions	quasi-flush
Active area	front side
Ensured switch distance ON Sao	8 mm / 18 mm
- Actuating magnet BP 6	8
- Actuating magnet BP 15 SS	18
- Actuating magnet BP 10	18
- Actuating magnet BP 8	8
Ensured switch distance OFF Sar	22 mm / 32 mm
- Actuating magnet BP 15 SS	28
- Actuating magnet BP 6	20
- Actuating magnet BP 10	28
- Actuating magnet BP 8	20
Type of actuation	Magnet
Direction of motion	head-on with regard to the active surface
restistance to shock	30 g / 11 ms
Resistance to vibration	10 … 55 HZ, Amplitude 1 mm
Impact energy	max. 2 Nm

Ambient conditions

Ambient temperature
- Min. environmental temperature	−25
- Max. environmental temperature	+70
Storage and transport temperature
- Min. Storage and transport temperature	−25
- Max. Storage and transport temperature	+70
Protection class	IP67

Electrical data

Integrated Safety monitoring module available (Y/N)	No
Cross circuit/short circuit recognition possible (Y/N)	Yes
Voltage type	VAC/DC
Switch frequency	max. 5 HZ
Switching voltage	max. 120 VAC/DC
Switching current	max. 250 mA
Switching capacity	max. 5 W

Outputs

Design of control output
Number of shutters	1
Number of openers	2
Design of output signal switching device

Electrical data - Safety outputs

Number of secure semi-conductor outputs	0
Number of secure outputs with contact	2

Electrical data - Diagnostic output

Number of semi-conductor outputs with signaling function	0
Number of outputs with signaling function that already have a contact	1

LED switching conditions display

LED switching conditions display (Y/N)	No

ATEX

EX-marking	EX II 3D Ex tc IIIC T80°C Dc X EX II 3G Ex nC IIC T6 Gc X
Explosion protection categories for gases	3G
Explosion protection Zones for gases	2
Explosion protected category for dusts	3D
Explosion protection Zones for dusts	22

Dimensions

Dimensions of the sensor
- Length of sensor	36
- Diameter of sensor	M18

notice

Contact symbols shown for the closed condition of the guard device.
The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN 1088)

Included in delivery

Actuators must be ordered separately.

Keywords

Keywords	Ex, EEx, ATEX, Ex BNS180, EX BNS 180, BNS 180 Ex, BNS180ex, BNS 180 ex, ATEX BNS 180

Diagram

Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 06.12.2019 - 22:58:41h Kasbase 3.3.0.F.64I