Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Thermoplastic enclosure
• Double-insulated
• Good resistance to oil and petroleum spirit
• 30 mm x 88,5 mm x 30 mm
• Actuator heads can be repositioned by 4 x 90°
• Connector M12, 4-pole

Ordering details
Product type descriptionT5C 236-02Z-ST - Ordering suffix
Article numberT5C 236-02Z-ST
EAN Code
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)20.000.000
Mission time20 Years
Global Properties
Permanent lightT.C 236 Rechtsausführung
StandardsEN 60947-5-1, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the actuatorStainless steel
- Material of the contactsSilver
Housing coatingNone
Mechanical data
Design of electrical connectionConnector M12
Mechanical life> 1.000.000 operations
Switching frequencymax. 5000 /h
Design of actuating elementSwivel lever
Opening angle180 °
Positive break angle12.5 °
Positive break torque18.5 Ncm
actuator78 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature−30 °C
- Max. environmental temperature+80 °C
Protection classIP67
Electrical data
Design of control elementOpener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts0
Number of safety contacts2
Rated impulse withstand voltage Uimp0,8 kV
Rated insulation voltage Ui50 V
Thermal test current Ithe10 A
Utilisation categoryAC-15: 50 V / 4 A,
DC-13: 24 V / 1 A
Max. fuse rating6 A gG D-fuse
noticeCaution! The versions with connector may only be used in PELV circuits to EN 60204-1.
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor30
- Height of sensor161
- Length of sensor30

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact
Ordering suffix
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: T5C 236-02Z-ST- 2310
...- 2310 M12 connector with B-coding

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 07.12.2019 - 00:49:01h Kasbase 3.3.0.F.64I